产品描述

产品规格全系列产品包装说明原装进口,特价销售



You have static, we have solutions

BR1200 Round Static Bar BR2200 Rectangular Static Bar BR4400 Extended Range Double Bar

High Output Ionization

Design for use in any environment

Optional Air Tube Assist Available

Specifications

Round: 1.9cm diameter

Overall Length: 150 ~ 3600mm

Effective Length:  76 ~ 3580mm

Ionizing Point Spacing: 1.9 or ctr

Optimum Range: 1.9 to 7.6cm

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

High Output Ionization

Design for use in any environment

Optional Air Tube Assist Available

Specifications

Rectangular: 1.9 X 2.2 cm

Overall Length: 150 ~ 3600mm

Effective Length:  76 ~ 3580mm

Ionizing Point Spacing: 1.9 or ctr

Optimum Range: 1.9 to 7.6cm

Mounting: Adjustable rear mounting stud 8-32 x 1.2cm

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

High Output Ionization

Design for use in any environment

Optional Air Tube Assist Available

Specifications

Dimensions: 6.6 X 2.54cm

Overall Length: 260 ~ 3800mm

Effective Length:  150 ~ 3650mm

Ionizing Point Spacing: 1.9 or ctr

Optimum Range: 1.3 to 20cm

Mounting: Adjustable rear mounting stud 8-32 x 1.2cm

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

AK1200 Series AK2200 Series AK3200 Series

The AK1200 comes with a static bar

Low air consumption

Balanced, uniform airflow and quiet operation

Variable Force and Flow

Ionized air for neutralizing a static charge

Available in stainless steel or aluminum

Specifications

Standard Length: 76cm, 152cm, 305cm, 457cm, 610cm, 762cm, 914cm, 1067cm

Special length up to 122cm and systems up to 3.05m are available.

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

The AK2200 comes with a static bar

Low air consumption

Balanced, uniform airflow and quiet operation

Variable Force and Flow

Ionized air for neutralizing a static charge

Available in stainless steel or aluminum

Specifications

Standard Length: 76cm, 152cm, 229cm, 305cm, 457cm, 610cm, 762cm, 914cm, 1067cm

Special length up to 122cm and systems up to 3.05m are available.

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

The AK3200 comes with a static bar

Ultra Low Air Consumption

Ultra-Quiet Operation (<65dB)

Balanced, uniform airflow and quiet operation

Variable Force and Flow

Ionized air for neutralizing a static charge

Available in stainless steel or aluminum

Specifications

Standard Length: 76cm, 152cm, 229cm, 305cm, 457cm, 610cm, 762cm, 914cm, 1067cm, 1219cm

Special length up to 122cm and systems up to 3.05m are available.

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

The SB-30A Charging Power Supply is a state-of-the-art 150W 30kV DC power supply designed to temporarily bond materials together using electrostatic charging applicators.

The programmable output of the supply ranges from zero to greater than full-scale rating (30kV potential and 5.0mA current).

The SB-30A local console provides a simple, reliable user interface for manual operation.

A remote console is available for manual operation when the power supply is situated in an inconvenient or inaccessible location. The remote console, on/off footswitch and other accessories can be connected to the SB-30A Remote-Manual port.

The SB-30A also features an electronic interface for fully automated operation with a PLC or similar equipment connected to the Remote-Auto port. Both ports can be wired using industry-standard DB-25 cables.

The SB-30A output can be programmed for either constant-voltage (CV) or constant-current (CC) mode.

Specification Specification (Conti.) Specification (Conti.)

SB-30A Charging System

Features

? Reversible local-console orientation (factory option) for either table or wall mounting
? Flat-panel console with membrane-switch commands, LED display and key-switch lockout
? Two full-function I/O ports for manual and automated remote operation
? Output protection for short-circuit, open-circuit and arc-over load conditions
? Input protection for under-voltage and over-voltage line conditions
? Thermal protection with over-temperature shutdown and fan-failure alert
? Large, bright voltage/current-meter with signed 3-digit LED display
? Self-mounting/stacking chassis provides top and bottom attachment without separate brackets
? Four-port output compatible with most major-brand charging applicators
? Stackable SB-30A combo available for applications requiring both positive and negative charging
? Front-panel key-switch/indicator and rear-panel configuration switches for automated operating mode

Specifications

Programmable Charging Modes: Constant-Voltage (CV), Constant-Current (CC) output regulation

Specifications (Conti.)

Output Ratings: 0-30kV, 0-5.0mA, 150W

Input Rating: 100-120 or 200-240VAC, 50/60Hz

Output Ports: 4 (Electrically Common)

Charging Polarity: Positive or Negative and Bipolar (Dual-Supply)

Output Rise Time: <25ms(CC), <20ms(CV)

Remote I/O: 25P D-subminiature socket/receptacle (DB-25F)

Enclosure: Epoxy-Coated Steel, Blue

Dimensions: 26.2cm W X 11.3cm H X 34.0cm D

Weight: 6.7kg

Operating Temperature: 0°C to 40°C


StaticBond Charging Bar

Specifications

Overall Length: 15cm - 300cm

Effective Length: 15cm shorter than overall length

Diameter: 3.1cm

Adjustable mounting studs for easy installation 3m of high voltage cable


StaticBond Spot Charger

Specifications

2 Brush Electrodes (one spare)

Specifications (Conti.)

3m HV Cable Assembly

25cm HV Cable Jumper with Spot Charger Mounting Brackets and Quick Lock connectors

SB-30A StaticBond Charging System


Arc Resistance Charging Bar

Features

When using the SBCB4000 series charging bars which is Resistively Coupled Charging Bars, the energy placed on the emitter pins or needles from the Charging Power Supply is reduced to below spark over levels. This contributes to reduced electrical noise, greater safety features and efficiency of the process.

J160 Series 4CH HV Power Supply TSN75 Series HV Power Supply

The J160 Series Static Neutralizing Power Supplies are 4kV, 5kV and 7Kv power supply series. It is a low power, high impedance, step-up transformer, potted with internal current limits to provide appropriate power to the applicator, and safety to the user.

This unique power supply features a transformer that provides constant, stable output voltage despite line voltage fluctuations.

Specification

Type: AC High Voltage, Constant Output Transformer

Input Voltage: 115 or 230VAC

Frequency: 50/60Hz

Output Voltage: 4kV (J164), 5kV (J165), 7.5kV (J167)

Input Current: 0.5amp

Output Current: 0.005amp

Dimensions:  12.4cm W X 11.4cm H X 21.8cm L

Weight: 2.7kg

The TSN75 static neutralizing power supply is low power, high impedance, step-up transformer potted with internal current limits to provide appropriate power to the "applicator" and safety to the user. Its features include:

A constant voltage transformer which provides stable output voltage despite line voltage fluctuations

Specification

Type: AC High Voltage, Constant Output Transformer

Input Voltage: 115 or 230VAC

Frequency: 50/60Hz

Output Voltage: 7.5kV

Input Current: 0.5amp

Output Current: 0.005amp

Dimensions:  10cm W X 8.8cm H X 14.6cm L

Weight: 2.15kg








http://enfionsh.b2b168.com