产品描述

产品规格全系列产品包装说明原装进口，特价销售

HFRR高频往复仪适合于润滑性相对较差的油品（如柴油）的磨损检测，它适合用于机油、酯和其它化合物摩擦临界点的检测。符合ASTM D6079，ASTM D7688，

【详细说明】

HFRSS PCS Instruments HFRR螺钉套件 HFRR Screw set
HFRTOOL PCS Instruments HFRR工具套件 Tool Set
HFRCAL PCS Instruments 校准装置 HFRR Calibration device
HFRCAL2 PCS Instruments 温度校准插头 Temperature calibration plugs
HFRSSP PCS Instruments 试验球,试验片,标准样品包 HFRR Upper and Lower Specimens
HFRMICLAMP PCS Instruments 显微镜套件 Replacement lamp for HFR microscope
HFRGRAT PCS Instruments HFRR套件 Calibration Graticule
HFRHYG PCS Instruments HFRR套件自动温度 HFRR Humidity and Temperature probe including cable & bracket
HFRRSSP PCS Instruments 标准试样 PACK OF STANDARD TEST SPECIMENS (100 UPPER AND 100 LOWER SPECIMENS)
HFRMIC PCS Instruments 显微镜套件 HFRR/HFR2 Metallurgical Microscope
HFRPRI PCS Instruments 推杆套件 HFRR Pushrod Insert
HFRHB PCS Instruments 加热块 Heater Block
HFRWT PCS Instruments 法码 Weight set


















ABS (Automated BOCLE System)

The ABS - automatic instrument to perform the ASTM D5001 test method for "Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator".

ABSSL (Automated BOCLE System Scuffing Load)

The ABSSL - automatic instrument that conforms to the requirements of ASTM D-6078 "Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)"

EHD (Elasto Hydrodynamic Lubrication)

The EHL Ultra Thin Film Measurement System is a computer controlled instrument for measuring the film thickness and traction coefficient(friction coefficient) of lubricants in the elastohydrodynamic lubricating regime.

HFRR (High Frequency Reciprocating Rig)

The HFRR is a microprocessor-controlled reciprocating friction and wear test system which provides a fast, repeatable assessment of measuring the lubricity of low-sulphur diesel fuel as specified in CEC, ASTM, ISO, IP and JIS test methods.

MPR (Pitting/Micro Pitting Rig)

The automated micropitting test rig uses the proven three point contact configuration. This allows a large number of cycles in a short period of time, greatly reducing testing time.

MTM (Mini Traction Machine)

The MTM2 is a flexible general purpose instrument for measuring the frictional properties of lubricated and unlubricated contacts under a wide range of rolling and sliding conditions.

USV (Ultra Shear Viscometer)

The USV is a computer controlled instrument capable of fully automatic viscosity measurements at 107s-1.






http://enfionsh.b2b168.com