产品描述

产品规格全系列产品包装说明原装进口,特价销售

上海盈沣元器件有限公司专业代理销售美国Cross泵,Cross马达,Cross气缸,Cross齿轮泵,Cross阀

如有需求，欢迎来电垂询 缑先生



Gear Pumps and Motors

Rated to 3000 psi. Spline or keyed shafts, side or rear porting, dual rotation available on standard models. Pressure balanced loading plates on either side of gears for maximum efficiency.

See Gear Pump & Motor Technical Sheet


Request Form #P401, M401Series 40

See Standard Series 40 Pumps & Motors

  • SAE “A” 2-bolt mount. Rated to 17.5 gpm.
  • 6 sizes: .5, .75, 1.00, 1.25, 1.50 and 1.80 in3/rev.


Request Form #P501, M501Series 50

See Standard Series 50 Pumps & Motors

  • SAE “B” 2-bolt mount. Rated to 44 gpm.
  • 7 sizes: 1.52, 1.95, 2.32, 2.74, 3.30, 3.80 and 5.20 in3/rev.


Request Form #P601, M601Series 60

See Standard Series 60 Pumps & Motors

  • SAE “C” mount. Rated to 90 gpm.
  • 6 sizes: 4.05, 5.15, 6.15, 7.15, 8.15, 9.25 in3/rev.


Request Form #P502Series 53

  • Dual (tandem) body pump in single rotation only.
  • Available in SAE “B” mount - displacements same as Series 50
  • Operate as two separate sections, combined sections or with common inlet and two outlets to supply flow to two separate systems.


Request Form #M502Series 50G

See Standard Series 50G High Torque Motors

  • Planetary gear reducer to produce high torque at low speeds.
  • 5.33:1 gearbox reduction.
  • SAE “C” mounting. 4 bolt mtg with spline or keyed output shafts.
  • Tapered roller bearings for thrust and side loads.
  • 8,000 in/lbs maximum continuous output torque.

Standard Products

2" to 5" bores, clevis mounted.DB Series

  • Standard and ASAE closed centers.
  • NPTF or SAE porting


2" to 4" bores, ASAE, clevis mounted.DU & DE Series

  • Rod threaded for mechanical depth control on DU
  • Mechanical depth control included on DE
  • NPTF or SAE porting


2" to 4" bores, clevis mounted.DH Series

  • Heavy duty seals and upgraded castings.
  • Hardened steel pins 3" bore and up.
  • SAE porting


2" to 5" bores, ASAE, clevis mounted.DCR and DR Rephasing Series

  • Internal piston bypass for synchronizing cylinders in a series circuit
  • SAE porting


Standard Welded CylinderNU Series

  • Clevis Mounting.
  • Specific Bores and Strokes
  • NPTF Ports
  • 2500 or 3000 (HD) PSI


3500 PSI operating pressureModel SS

  • Open (tandem) center
  • 9/16-18 (SAE #6) inlet, outlet and work ports
  • Outlet may be used to run other valves downstream (Contact CROSS for guidelines)
  • Sections may be used alone or stacked for multiple functions
  • Load checks to prevent reverse flow when shifting out of neutral in lifting applications
  • Optional single handle actuator with protective boot
  • 7 GPM flow rating
  • Series operation





Model SBA

  • 1, 2 or 3 spool valve, 30 gpm, 2500 psi.
  • Excellent metering, integral differential poppet-type relief and load checks.
  • Joystick, air actuator and heavy duty handle field kits available.
  • Power beyond and closed center available.


Pressure compensated priority typeModel SBC (Standard BC Flow Control Valve)

  • 2500 PSI, 25 GPM
  • Output volume adjustable from 0 to 25 GPM


1 spool, 30 gpm, built-in relief,SCA (Standard CA Series)

  • 1500 PSI fixed relief
  • For motors or horizontal cylinder applications


1 spool, 2000PSISCD (Standard CD Series)

  • 30 gpm
  • Manual extend
  • Pressure Kickout on retract for logsplitters


Single spool standard model, open center onlySCV-1 (Converta)

  • Simple field conversion from 4-way to 3-way as well as spring centered to manual detent.
  • Not intended for use in metered lifting circuits
  • 2000 PSI relief


Compact, space saving loader valve, 8-10 gpm or 15 gpm, 3000 psiModel SDV

  • Parallel operation, excellent metering, integral differential poppet-type relief and load checks
  • Open center: 4 way, float and regen capabilities
  • Handles or joystick
  • SAE Ports


20 gpm, 3000 psi, 3 ported, diverts flow to either of two separate circuitsModel SVS (Standard VS Single Selector Series)

  • 40 gpm, 3000 psi, 3 ported, diverts flow to either of two separate circuits
  • NPTF or SAE Ports


40 gpm, 3000 psi, 6 ported, diverts flow to either of two separate circuits using a single control valve.Model SSD4 (Standard Double Selector Series)

  • NPTF or SAE ports
  • Complete handle assembly


Alternately operate a pair of agricultural guide marker systems on a row marker system.SQV Sequence Valve

  • May be used with single acting or double acting marker cylinders.
  • 2 position, 3 port.


Dual relief, differential poppet style for cylinders or motors of equal displacement to cushion shock or surge pressures.Model SRC (Standard RC Cushion Valve)

  • Adjustable or non-adjustable. 500 to 3000 psi.
  • 30 gpm capacity, ductile iron body.
  • NPTF or SAE Ports


Hydraulically dampened differential poppet-style relief valve.Model SRD (Standard RD Single Relief)

  • Adjustable 500 to 3000 psi. 30 gpm capacity.
  • NPTF or SAE ports


SAE “A” 2-bolt mount. Rated to 17.5 gpm.Series 40

  • 6 sizes: .5, .75, 1.00, 1.25, 1.50 and 1.80 in3/rev.


SAE “B” 2-bolt mount. Rated to 44 gpm.Series 50

  • 7 sizes: 1.52, 1.95, 2.32, 2.74, 3.30, 3.80 and 5.20 in3/rev.


SAE “C” mount. Rated to 90 gpm.Series 60

  • 6 sizes: 4.05, 5.15, 6.15, 7.15, 8.15, 9.25 in3/rev.


Planetary gear reducer to produce high torque at low speeds.Series 50G

  • 5.33:1 gearbox reduction.
  • SAE “C” mounting. 4 bolt mtg with spline or keyed output shafts.


3.1 step-up from 540 rpm splined PTO shaft. Thru-type 6-tooth internal PTO shaft for operating PTO driven attachment with pump in operation.Series 50T

  • Available in effective displacements of 4.6, 5.6, 7.0, 8.2, 9.9, 11.4 and 15.6 in3/rev.


200 psi pressure ratingSF Series Filters

  • Operating temp: -20° to +300° F
  • Internal bypass pressure: 15 psi for return line applications
  • 1A1699 replacement gauge

Tie Rod Cylinders

Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.


Request Form #CD01DB Series

See Standard DB Series

  • 2" to 5" bores, clevis mounted.
  • Standard and ASAE closed centers.


Request Form #CD02DU & DE Series

See Standard DU & DE Series

  • 2" to 4" bores, ASAE, clevis mounted.
  • Rod threaded for mechanical depth control on DU
  • Mechanical depth control included on DE


Request Form #CD02.1, #CD04DCR and DR Rephasing Series

See Standard DCR & DR Rephasing Series

  • Designed for series use - cylinders are volumetrically matched and feature a unique bypass system with special piston seals. Cylinders rephase automatically upon full extension.


Rated to 3000 psi, 6000 psi proof pressure.DH Series

Request Form #DH01
See Standard DH Series

  • 2" to 4" bores, clevis mounted.
  • Heavy duty seals and upgraded castings.
  • Hardened steel pins 3" bore and up.


Request Form #PDHPDH Position Cylinder

PDH Information

  • Internal electronic feedback senses cylinder rod position.
  • Provides output to allow constant monitoring of the cylinder rod position for steering applications, blade control, etc.
  • All sensor components except electrical connector are imbedded internally for superior durability and long field life.
  • Available in 2" to 5" bore and rated to 3000 psi.


Request Form #PDPDB Position Cylinder

PDB Information

  • Internal electronic feedback senses cylinder rod position.
  • Provides output to allow constant monitoring of the cylinder rod position for steering applications, blade control, etc.
  • All sensor components except electrical connector are imbedded internally for superior durability and long field life.
  • Available in 2" to 5" bore and rated to 2500 psi.













http://enfionsh.b2b168.com