英国Dynafluid（戴那福尔）3000型 热水-冷水混合阀

高温水+冷水=T±2℃控温水
适用于屠宰场、酿造厂、食品厂、流程装置、石油化工以及各种有特别卫生要求的企业

 

Dynafluid 3000型混合阀有两个进水管，一个进热水一个进冷水，在阀内混合后直接由热水出水管输出，管接头3/4" BSP螺母。
阀内设有过滤器、止回阀、热静力控制阀芯，设定温度由旋钮调整。调温范围40-60℃，较高温度60℃由制造厂设定。个别需要高温时有一手动叠加控制，较高可达70℃。
阀体材料为炮铜，调温旋钮、安装台架为高强工程塑料。止回阀和热静力阀芯均为耐热的热塑性塑料。

 

优点：
1. 热水即开即有
2. 可安装在任何地方，只要有热水源
3. 安全——冷水进水中断时快速关死
4. 准确——温度控制在±2℃之内
5. 控制阀芯不需维护
6. 提供全部备件，维修不需从管线拆下
7. 直接安装，不需燃气和电源
8. 内附过滤器和止回阀

英国Dynafluid（戴那福尔）2000系列 汽-水混合阀（蒸汽+冷水=热水） 适用于化工厂、制药厂、屠宰场、酿造厂、食品厂、洗衣房等工业企业 

英国Dynafluid 汽-水混合阀的详细信息

英国Dynafluid（戴那福尔）2000系列 汽-水混合阀（蒸汽+冷水=热水）
适用于化工厂、制药厂、屠宰场、酿造厂、食品厂、洗衣房等工业企业

操作原理：
当出口控制机构（水枪扳机或球阀）打开时，冷水流入阀体，压差的变化将活塞托起从而使蒸汽阀塞从其阀座上抬起，蒸汽流入混合腔，与冷水混合产生热水。控制机构一旦关闭，活塞上下压差消失，强大的弹簧将阀塞推回阀座，蒸汽关闭。因此，只要没有冷水流入，活蒸汽就不可能流出。

适用场合：
1. 屠宰场、牛奶场、酿造厂、化工装置、造纸厂等：地面、墙面工作台清洗；
2. 烘烤房、食品加工车间、制药厂、化妆品厂、酿造厂、瓶装生产线：容器、发酵桶以及反冲过滤器的清洗；
3. 屠宰场、肉类及鱼类加工厂：动物躯体及下水清理；
4. 通用工业企业、运输业：车辆及机械的清洗；
5. 洗衣房、纺织业制衣业：工业洗涤机用热水；
6. 伙食房：碗碟器皿清洗用热水。

Dynafluid 2000

Description:
STEAM - YOUR OPPORTUNITY TO CUT THE COSTS OF HOT WATER

If your facility already has steam available, you could cut your costs of producing hot water at a stroke. Forget the complexity of installing pumps and water heaters for your washdown or process requirements. Forget the time, nuisance and cost of keeping them maintained. And cut your running costs by up to 80% at the same time! Dynafluid 2000 is the state-of-the-art steam and water mixer valve. It's safe, practical, versatile, and low-maintenance too.

WHY THE DYNAFLUID 2000 MIXER VALVE IS SO SAFE
When the outlet control is opened, cold water flows into the valve body. This change in differential pressure raises the valve's piston, lifting the steam valve from its seat.
Steam combines with the cold water in a mixing chamber to create instantaneous hot water.
Once the control is turned off, a spring, reinforced with static water pressure closes the valve. This shuts the steam off completely. So, in the absence of cold water, steam cannot escape through the outlet. This fail-safe principle is the heart of the Dynafluid design and is the key to its worldwide success.

VERSATILE
Dynafluid 2000 steam and water valves are the preferred choice for a vast array of industries throughout the world. You'll find them in abattoirs, breweries, chemical and pharmaceutical complexes, dairies, food production, and processing plants, launderettes - the list is endless!
Whether your requirement is hot water for wash down systems, jacketed vessels, back-flushing filters, vehicle washing or in process heating, you'll find a total Dynafluid solution to fit your needs.

JUST A FEW OF THE OUTSTANDING BENEFITS ON OFFER:
? Outstanding economy - up to 80% cost-savings
? Instantaneous hot water
? Unrivalled operator safety - steam shuts off automatically if cold water pressure is less than 1 Bar
? Easy to service without removing from pipe work - full spares availability
? Available in four sizes from ?” to 1?” for flow rates up to 350 l/min.
? Simple installation - no gas or electrical connections required
? Variety of finishes, including stainless steel for hygienic applications
? Unique, proven over 40 years' international experience

Dynafluid 3000

Description:
SIMPLE, COST-EFFECTIVE SOLUTION FOR HOT OR WARM WATER... INSTANTLY

The Dynafluid 3000 offers a straightforward and economic solution for instant, temperature controlled hot water on demand. Mixing high temperature hot water from a boiler or heat exchanger with cold water, the Dynafluid 3000 gives precisely controlled warm or hot water where it is needed, at the point of use.

WASH-DOWN
The thermostatically controlled Dynafluid 3000 is the ideal choice for the washing down of walls or floors, carcass cleaning and vessel filling. It is the logical choice for any operation that has a ready supply of high temperature water that needs to be reduced to a lower temperature before it can be used. Typical uses include abattoirs, breweries, food production and processing plants, the petrochemical and processing industries - in fact, anywhere that hygiene is paramount.

ALWAYS IN CONTROL
The Dynafluid 3000 is a thermostatic valve that can be adjusted from 40°C up to the factory-set maximum of 60°C and, in normal operating conditions, the temperature is held to within +2°C. A manual override can increase the outlet temperature to a maximum of 70°C for particularly demanding cleaning operations that require water of a higher temperature. In the event of failure of the cold water supply, the valve will shut down within five seconds, preventing high temperature hot water from being discharged.

TOUGH AND BUILT TO LAST
This valve is specifically designed to operate in the harshest industrial environments. The main valve body is cast in gunmetal and the large adjustment knob and mounting bracket are in tough engineering plastic. Inside, the thermostatic and check valve cartridges are made in heat resistant thermoplastic polymers. The Dynafluid 3000 operates over a range of 0.5 to 6.0 bar operating pressure and 10 bar static pressure. End connections are industry-standard 3/4 inch BSP female threads, with 6
inch (150mm) pipe centres.

DYNAFLUID 3000 - JUST LOOK AT THE BENEFITS:
? Instantaneous hot water
? Versatile—can be installed wherever a ready supply of hot water is available
? Safe—valve shuts down within five seconds if cold water supply fails
? Accurate—controls temperature to within ±2°C
? Service-free temperature control cartridge
? Easy to service without removing from pipework—full spares availability
? Straightforward installation—requires no gas or electricity supply
? Complete with strainers and check valves

http://enfionsh.b2b168.com