产品规格全系列产品包装说明原装进口,特价销售
MAGPAC series
Smaller and smart formCompact standard centrifugal pumpMA / MB
Quick delivery
Motor output25W to 60W
Maximum temperature 130℃. Highly reliable compact stainless steel magnet pump that does not leak any liquid. Lightweight and compact so it is suitable for equipment-use.
Bestseller for equipment-useSmall standard centrifugal pumpMMP
Quick delivery
Motor output90W to 550W
The pump is simple structure and compact design. Robust and versatile for various equipment. Motor is separated, so explosion-proof requirement is possible.
Standard of seal-less pumpMedium-size standard centrifugal pumpMP
Quick delivery
Motor output0.75kW to 7.5kW
Core model of the series. It greatly reduces total cost (life-cycle cost) and comes in wide range of capacities, up to 7.5 kW.
Higher total head and higher flow rateMulti-stage centrifugal pumpMPM2
Motor output11kW to 22kW
Multi-stage, high efficiency, stainless steel magnet drive pump. Achieves a large flow rate with a high total head (100 m, 1.0 MPaG)
Space-saving and easy to installIn-line pumpMPCP
Motor output0.4kW to 5.5kW
As they are in-line pumps, they occupy only small area and don't need large-scale engineering to install. In addition, they can be directly coupled to the existing piping.
New value added - Hybrid -Jacket pumpMPJ
Motor output1.5kW to 3.7kW
Stainless steel magnet pump with a semi-jacket that offers good heat retention properties at low cost and straightforward simplicity. Can be used for high and low melting point liquids as well as high temperature liquids.
Tough and safetyOpen impeller centrifugal pumpMPO
Motor output0.2kW to 7.5kW
Capable of handling some sludge and slurry. Also ideal for low NPSHa, such as vacuum condition. In addition, electrolytic polishing and buffing are available as an option.
High total head, low flow rateStandard cascade pumpMSW
Motor output0.55kW to 3.7kW
This is our standard model stainless steel magnet cascade pump. They contribute to improve thermal efficiency for the machines on which the pumps are mounted. Ideal for low flow rate and high total head.
Global standardCascade pumps for equipment-useMWK
Motor output0.55kW to 3.0kW
Stainless steel magnet cascade pumps that are specially designed to be mounted on machines. They contribute to improve thermal efficiency of machines and suitable for small flow rate and high pump head.
Added self priming capabilityStandard self-priming cascade pumpsMCK
Motor output0.4kW to 0.75kW
Self-priming
Easy to install, compact and lightweight. Suitable for small flow rate and high total head for equipment-use
Stainless Mag
Standard centrifugal pumpStainless MagNEW
Quick deliverylow price
Motor output0.37kW to 2.2kW
Cost reduction is realized because of simple construction. The leak-free feature is suitable for food processing, pharmaceuticals and general industries.
F series
Low temperature (-100℃) & high specific gravity(1.8)
Motor output0.15kW to 3.0kW
Compact design for low temperature liquid (-100℃) suitable for equipment-use.
META series
ISO2858 (JIS B 8313, 16bar) compliantProcess pumpMET
Motor output0.75kW to 110kW
ISO2858 international standard complicant (JIS B 8313, 16bar) Stainless steel magnet drive pump. Cover a wide range performance 200x150mm, up to a maximum 110kW.
ISO2858 (JISB8313,16bar) compliantClose-coupled process pumpMTFO
Motor output2.2kW to 22kW
Stainless steel magnet drive pump that can be directly connected to the international standard ISO2858 (JISB8313,16bar) compliant piping. An open impeller is adopted as a standard.
Easy to transfer slurryPump for high concentration slurryNEWMDS
Motor output1.5kW to 22kW
Capable of handling high concentration slurry. Neither external flushing nor bearing monitoring are necessary. Excellent in durability. Cover a wide range from 2.2 to 22 kW. The standard discharge separator makes the pumps even easier to use.
Heavy duty series
ANSI B 73.1 compliantProcess pumpMAXP
Motor output0.75kW to 130kW
Conforms to ANSI standard B73.1. Flexibly designed for use in a variety of situations, they have high functionality and lots of options. Pumps that conform to the API standard are also available on request.
ANSIB73.1 compliantCenter support process pumpMXPC
Motor output0.75kW to 130kW
Capable of handling high temperature liquids: The casing is supported on the center line. Flexibly designed for use in a variety of situations, they have high functionality and lots of options. Pumps that conform to the API standard are also available on request.
Maximum total head 245mMulti-stage process pumpMPCM2
Motor output11kW to 55kW
This multi-stage stainless steel magnet drive pump Realized high total head (max 245m) Temperature range from -30℃ to 260℃
High Performance Slurry Pumps
Type ILDry run capabilityGala Pump
Can pump solid/gas/liquid mixture, type IL strongly recommended in the application below.
-
Unload the liquid in the tank completely from bottom
-
Recovery of overflowed liquid
-
Gas phase reaction process line
-
Antifoam-containing process line
-
Transfer or circulation of slurry
Type SD-K4 different uses are available with only 1 unit of pump Chopping, mixing, dispersion, pumpingScatter Pump
-
4 different functions are integrated in 1 pump
-
Labor saving.
-
Improve operating condition to provide better productivity.
-
Easy maintenance
-
Additional benefits~
-
Mixing and stirring capability, clogging prevention, reaction promotion
Type PSFor slurry protection applicationThrough Pump
Neither clogging nor breaking down of the solid or crystalline materials will happen. Type PS is strongly recommended in the application below.
-
Transfer of slurry or solid carrying liquid, where clogging is likely to happen when use a conventional pump.
-
Food plants
-
Various resins/ rubber factory
-
Transfer of various intermediate slurries in a centrifuge or a filtration system
Process Seal Pump
Type ICHigh performance centrifugal pump conformable to ISO2858 (JIS B 8313, 16bar)Process Seal Pump IC
Bore size:40 to 250mm
Capacity:0.05 to 18m3/min
Total head: Max.130m
Temperature:-30 to +200℃
-
Crevice corrosion-prevention type
-
Cheap running cost
-
A variety of applicable shaft seal
-
Easy maintenance & centering
-
Low NPSH
Type IDHigh performance centrifugal pump conformable to ISO2858 (JIS B 8313, 16bar)Process Seal Pump ID
Bore size:40 to 250mm
Capacity:0.05 to 18m3/min
Total head: Max.130m
Temperature:-30 to +200℃
-
Performance adjustable
-
Easy maintenance
-
Crevice corrosion-prevention type
-
Highly reliable
-
A variety of applicable shaft seal
http://enfionsh.b2b168.com