产品描述

产品规格全系列产品包装说明原装进口,特价销售

The ULTIMATE LUBER? is a powerful, motor-driven automatic lubricator which is refillable using standard grease guns. Its microprocessor controlled, energy efficient motor delivers grease to a fixed displacement pump which produces pressure up to 900 PSI. This strength allows the ULTIMATE LUBER? to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively. When a dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the ULTIMATE LUBER? dispenses approximately 0.05 oz of grease. Neither temperature nor altitude will affect the lubricant outpout. 







Item #

Height

Diameter

Capacity

Temperature Range

ULT500 8 3/4 in 4 3/4 in 17 fl oz 5° to 132° oF
ULT250 7 1/2 in 4 in 8 fl oz 5° to 132° oF
ULT125 7 1/2 in 3 1/8 in 4 fl oz 5° to 132° oF




The JACK LUBER is the most versatile product in the ATS product line. It is built on the proven ULTIMATE LUBER? technology incorporating the JACKSCREW mechanism — a powerful combination. The JACK LUBER has a replaceable, one-time use cartridge that changes out in seconds! The drive unit for the JACK LUBER is pure, ultimate, power, and runs off the ATS battery pack or with a direct AC/DC adaptor (optional). Producing over 200 PSI, the JACK LUBER is capable of heavy duty applications running long lines; even through a 2-Port Distribution Block. The JACK LUBER is tough, reliable, and easy to work with. It saves time, money, and gives you the performance you need and trust from ATS! 










Item #

Height

Diameter

Capacity

Temperature Range

JACK LUBER 7 1/2 in 3 1/8 in 4.2 fl oz -40° to 132°; -40° to 140° oF



Built with our proven ULTIMATE lubricator technology, the TITAN adds the convenience of using standard grease cartridges to make it even easier to refill. Based on the proven ULTIMATE pump design, the TITAN provides the user with the most powerful, stand-alone lubricator in the market and requires no tools for refilling - simply replace the grease cartridge and battery pack. (AC/DC Adaptors are also available.) Use for single-point lubrication or up to 12-point lubrication through a distribution block. 








Item #

Height

Width

Diameter

Capacity

Temperature Range

TITAN OILER 2000 12 in
30.5 cm 		5 in
13 cm 		7 1/2 in 47 fl oz -5° to 132 oF
ELECTRO-LUBER MD? 2000 TITAN II 17 3/4 in 8 in 7 3/16 in 14 fl oz -5° to 132 oF
TITAN CL LUBER? 24 1/2 in 6 in 8 in 14 fl oz -40° to 132° oF






The classic ELECTRO-LUBER? was developed in 1982. The ELECTRO-LUBER? uses an electro-chemical reactor cell which converts electrical energy into safe, inert nitrogen gas. The gas is trapped in a hermetically sealed bellow type gas chamber. ATS ELECTRO-LUBE was the first company to use this self-contained automatic lubrication technology; as the gas is produced, an internal pressure builds up in the bellos and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty between 15 days and 1 year depending on the setting of the simple user-programmable DIP switch. The selection can be changed or turned off at any time. 






Item #

Height

Diameter

Capacity

Temperature Range

J475 4 3/4 in 6 3/4 in 16 fl oz -40° to 132° oF
B250 4 in 6 1/8 in 8 fl oz -40° to 132° oF
M125 3 1/8 in 5 5/8 in 4 fl oz -40° to 132° oF
M60 3 1/8 in 4 7/8 in 2 fl oz -40° to 132° oF







http://enfionsh.b2b168.com